Skip to main content

RetroShare

Plugin: python.d.plugin Module: retroshare

Overview

This collector monitors RetroShare statistics such as application bandwidth, peers, and DHT metrics.

It connects to the RetroShare web interface to gather metrics.

This collector is supported on all platforms.

This collector supports collecting metrics from multiple instances of this integration, including remote instances.

Default Behavior

Auto-Detection

The collector will attempt to connect and detect a RetroShare web interface through http://localhost:9090, even without any configuration.

Limits

The default configuration for this integration does not impose any limits on data collection.

Performance Impact

The default configuration for this integration is not expected to impose a significant performance impact on the system.

Metrics

Metrics grouped by scope.

The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels.

Per RetroShare instance

These metrics refer to the entire monitored application.

This scope has no labels.

Metrics:

MetricDimensionsUnit
retroshare.bandwidthUpload, Downloadkilobits/s
retroshare.peersAll friends, Connected friendspeers
retroshare.dhtDHT nodes estimated, RS nodes estimatedpeers

Alerts

The following alerts are available:

Alert nameOn metricDescription
retroshare_dht_working retroshare.dhtnumber of DHT peers

Setup

Prerequisites

RetroShare web interface

RetroShare needs to be configured to enable the RetroShare WEB Interface and allow access from the Netdata host.

Configuration

File

The configuration file name for this integration is python.d/retroshare.conf.

You can edit the configuration file using the edit-config script from the Netdata config directory.

cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
sudo ./edit-config python.d/retroshare.conf

Options

There are 2 sections:

  • Global variables
  • One or more JOBS that can define multiple different instances to monitor.

The following options can be defined globally: priority, penalty, autodetection_retry, update_every, but can also be defined per JOB to override the global values.

Additionally, the following collapsed table contains all the options that can be configured inside a JOB definition.

Every configuration JOB starts with a job_name value which will appear in the dashboard, unless a name parameter is specified.

Config options
NameDescriptionDefaultRequired
update_everySets the default data collection frequency.5no
priorityControls the order of charts at the netdata dashboard.60000no
autodetection_retrySets the job re-check interval in seconds.0no
penaltyIndicates whether to apply penalty to update_every in case of failures.yesno
nameJob name. This value will overwrite the job_name value. JOBS with the same name are mutually exclusive. Only one of them will be allowed running at any time. This allows autodetection to try several alternatives and pick the one that works.no
urlThe URL to the RetroShare Web UI.http://localhost:9090no

Examples

Local RetroShare Web UI

A basic configuration for a RetroShare server running on localhost.

Config
localhost:
name: 'local retroshare'
url: 'http://localhost:9090'

Remote RetroShare Web UI

A basic configuration for a remote RetroShare server.

Config
remote:
name: 'remote retroshare'
url: 'http://1.2.3.4:9090'

Troubleshooting

Debug Mode

To troubleshoot issues with the retroshare collector, run the python.d.plugin with the debug option enabled. The output should give you clues as to why the collector isn't working.

  • Navigate to the plugins.d directory, usually at /usr/libexec/netdata/plugins.d/. If that's not the case on your system, open netdata.conf and look for the plugins setting under [directories].

    cd /usr/libexec/netdata/plugins.d/
  • Switch to the netdata user.

    sudo -u netdata -s
  • Run the python.d.plugin to debug the collector:

    ./python.d.plugin retroshare debug trace

Do you have any feedback for this page? If so, you can open a new issue on our netdata/learn repository.