Skip to main content

SpigotMC

Plugin: python.d.plugin Module: spigotmc

Overview

This collector monitors SpigotMC server performance, in the form of ticks per second average, memory utilization, and active users.

It sends the tps, list and online commands to the Server, and gathers the metrics from the responses.

This collector is only supported on the following platforms:

  • Linux

This collector supports collecting metrics from multiple instances of this integration, including remote instances.

Default Behavior

Auto-Detection

By default, this collector will attempt to connect to a Spigot server running on the local host on port 25575.

Limits

The default configuration for this integration does not impose any limits on data collection.

Performance Impact

The default configuration for this integration is not expected to impose a significant performance impact on the system.

Metrics

Metrics grouped by scope.

The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels.

Per SpigotMC instance

These metrics refer to the entire monitored application.

This scope has no labels.

Metrics:

MetricDimensionsUnit
spigotmc.tps1 Minute Average, 5 Minute Average, 15 Minute Averageticks
spigotmc.usersUsersusers
spigotmc.memused, allocated, maxMiB

Alerts

There are no alerts configured by default for this integration.

Setup

Prerequisites

Enable the Remote Console Protocol

Under your SpigotMC server's server.properties configuration file, you should set enable-rcon to true.

This will allow the Server to listen and respond to queries over the rcon protocol.

Configuration

File

The configuration file name for this integration is python.d/spigotmc.conf.

You can edit the configuration file using the edit-config script from the Netdata config directory.

cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
sudo ./edit-config python.d/spigotmc.conf

Options

There are 2 sections:

  • Global variables
  • One or more JOBS that can define multiple different instances to monitor.

The following options can be defined globally: priority, penalty, autodetection_retry, update_every, but can also be defined per JOB to override the global values.

Additionally, the following collapsed table contains all the options that can be configured inside a JOB definition.

Every configuration JOB starts with a job_name value which will appear in the dashboard, unless a name parameter is specified.

Config options
NameDescriptionDefaultRequired
update_everySets the default data collection frequency.1no
priorityControls the order of charts at the netdata dashboard.60000no
autodetection_retrySets the job re-check interval in seconds.0no
penaltyIndicates whether to apply penalty to update_every in case of failures.yesno
nameJob name. This value will overwrite the job_name value. JOBS with the same name are mutually exclusive. Only one of them will be allowed running at any time. This allows autodetection to try several alternatives and pick the one that works.no
hostThe host's IP to connect to.localhostyes
portThe port the remote console is listening on.25575yes
passwordRemote console password if any.no

Examples

Basic

A basic configuration example.

local:
name: local_server
url: 127.0.0.1
port: 25575

Basic Authentication

An example using basic password for authentication with the remote console.

Config
local:
name: local_server_pass
url: 127.0.0.1
port: 25575
password: 'foobar'

Multi-instance

Note: When you define multiple jobs, their names must be unique.

Collecting metrics from local and remote instances.

Config
local_server:
name : my_local_server
url : 127.0.0.1
port: 25575

remote_server:
name : another_remote_server
url : 192.0.2.1
port: 25575

Troubleshooting

Debug Mode

To troubleshoot issues with the spigotmc collector, run the python.d.plugin with the debug option enabled. The output should give you clues as to why the collector isn't working.

  • Navigate to the plugins.d directory, usually at /usr/libexec/netdata/plugins.d/. If that's not the case on your system, open netdata.conf and look for the plugins setting under [directories].

    cd /usr/libexec/netdata/plugins.d/
  • Switch to the netdata user.

    sudo -u netdata -s
  • Run the python.d.plugin to debug the collector:

    ./python.d.plugin spigotmc debug trace

Do you have any feedback for this page? If so, you can open a new issue on our netdata/learn repository.