Monitor your infrastructure
Netdata Cloud provides scalable infrastructure monitoring for any number of distributed nodes running the Netdata Agent. A node is any system in your infrastructure that you want to monitor, whether it's a physical or virtual machine (VM), container, cloud deployment, or edge/IoT device.
The Netdata Agent uses zero-configuration collectors to gather metrics from every application and container instantly, and uses Netdata's distributed data architecture to store metrics locally. Without a slow and troublesome centralized data lake for your infrastructure's metrics, you reduce the resources you need to invest in, and the complexity of, monitoring your infrastructure.
Netdata Cloud unifies infrastructure monitoring by centralizing the interface you use to query and visualize your nodes' metrics, not the data. By streaming metrics values to your browser, with Netdata Cloud acting as the secure proxy between them, you can monitor your infrastructure using customizable, interactive, and real-time visualizations from any number of distributed nodes.
In this quickstart guide, you'll learn the basics of using Netdata Cloud to monitor an infrastructure with dashboards, composite charts, and alarm viewing. You'll then learn about the most critical ways to configure the Agent on each of your nodes to maximize the value you get from Netdata.
This quickstart assumes you've installed Netdata on more than one node in your infrastructure, and connected those nodes to your Space in Netdata Cloud.
Set up your Netdata Cloud experience
Start your infrastructure monitoring experience by setting up your Netdata Cloud account.
Organize Spaces and War Rooms
Spaces are high-level containers to help you organize your team members and the nodes they can view in each War Room. You already have at least one Space in your Netdata Cloud account.
A single Space puts all your metrics in one easily-accessible place, while multiple Spaces creates logical division between different users and different pieces of a large infrastructure. For example, a large organization might have one SRE team for the user-facing SaaS application, and a second IT team for managing employees' hardware. Since these teams don't monitor the same nodes, they can work in separate Spaces and then further organize their nodes into War Rooms.
Next, set up War Rooms. Netdata Cloud creates dashboards and visualizations based on the nodes added to a given War Room. You can organize War Rooms in any way you want, such as by the application type, for end-to-end application monitoring, or as an incident response tool.
Learn more about Spaces and War Rooms, including how to manage each, in their respective reference documentation.
Invite your team
Netdata Cloud makes an infrastructure's real-time metrics available and actionable to all organization members. By inviting others, you can better synchronize with your team or colleagues to understand your infrastructure's heartbeat. When something goes wrong, you'll be ready to collaboratively troubleshoot complex performance problems from a single pane of glass.
To invite new users, click on Invite Users in the Space management Area. Choose which War Rooms to add this user to, then click Send.
If your team members have trouble signing in, direct them to the Netdata Cloud sign in doc.
See an overview of your infrastructure
Netdata Cloud utilizes "tabs" in order to provide you with informative sections based on your infrastructure.
These tabs can be separated into "static", meaning they are by default presented, and "non-static" which are tabs that get presented by user action (e.g clicking on a custom dashboard)
The default view for any War Room is the Home tab, which gives you an overview of this Space.
Here you can see the number of Nodes claimed, data retention statics, users by role, alerts and more.
The second and most important view is the Overview tab which uses composite charts to display real-time metrics from every available node in a given War Room.
The Nodes tab gives you the ability to see the status (offline or online), host details, alarm status and also a short overview of some key metrics from all your nodes at a glance.
Kubernetes tab is a logical grouping of charts regarding your Kubernetes clusters. It contains a subset of the charts available in the Overview tab.
The Dashboards tab gives you the ability to have tailored made views of specific/targeted interfaces for your infrastructure using any number of charts from any number of nodes.
The Alerts tab provides you with an overview for all the active alerts you receive for the nodes in this War Room, you can also see all the alerts that are configured to be triggered in any given moment.
The Anomalies tab is dedicated to the Anomaly Advisor tool.
The Functions tab gives you the ability to visualize functions that the Netdata Agent collectors are able to expose.
The Feed & events tab lets you investigate events that occurred in the past, which is invaluable for troubleshooting.
If you open a new dashboard, jump to a single-node dashboard, or navigate to a dedicated alert page, a new tab will open in War Room bar.
Tabs can be rearranged with drag-and-drop or closed with the X button. Open tabs persist between sessions, so you can always come right back to your preferred setup.
Drill down to specific nodes
Both the Overview and Nodes view offer easy access to single-node dashboards for targeted analysis. You can use single-node dashboards in Netdata Cloud to drill down on specific issues, scrub backward in time to investigate historical data, and see like metrics presented meaningfully to help you troubleshoot performance problems.
Read about the process in the infrastructure overview doc, then learn about interacting with dashboards and charts to get the most from all of Netdata's real-time metrics.
Create new dashboards
You can use Netdata Cloud to create new dashboards that match your infrastructure's topology or help you diagnose complex issues by aggregating correlated charts from any number of nodes. For example, you could monitor the system CPU from every node in your infrastructure on a single dashboard.
Read more about creating new dashboards for more details about the process and additional tips on best leveraging the feature to help you troubleshoot complex performance problems.
Set up your nodes
You get the most value out of Netdata Cloud's infrastructure monitoring capabilities if each node collects every possible metric. For example, if a node in your infrastructure is responsible for serving a MySQL database, you should ensure that the Netdata Agent on that node is properly collecting and streaming all MySQL-related metrics.
In most cases, collectors autodetect their data source and require no configuration, but you may need to configure certain behaviors based on your infrastructure. Or, you may want to enable/configure advanced functionality, such as longer metrics retention or streaming.
Configure the Netdata Agent on your nodes
You can configure any node in your infrastructure if you need to, although most users will find the default settings work extremely well for monitoring their infrastructures.
Each node has a configuration file called
netdata.conf, which is typically at
/etc/netdata/netdata.conf. The best
way to edit this file is using the
edit-config script, which ensures updates to the Netdata Agent do not overwrite
your changes. For example:
sudo ./edit-config netdata.conf
Our configuration basics doc contains more information about
along with simple examples to get you familiar with editing your node's configuration.
After you've learned the basics, you should secure your infrastructure's nodes using one of our recommended methods. These security best practices ensure no untrusted parties gain access to the metrics collected on any of your nodes.
Collect metrics from systems and applications
Netdata has 300+ pre-installed collectors that gather thousands of metrics with zero configuration. Collectors search each of your nodes in default locations and ports to find running applications and gather as many metrics as they can without you having to configure them individually.
Most collectors work without configuration, should you want more info, you can read more on how Netdata's metrics collectors work and the Collectors configuration reference documentation.
In addition, find detailed information about which system, container, and application metrics you can collect from across your infrastructure with Netdata.
Netdata Cloud features
Alerts and notifications
Troubleshooting with Netdata Cloud
- Spaces and War Rooms
- Alerts and notifications
- Troubleshooting with Netdata Cloud
- Management and settings
Was this page helpful?
Need more help?
- Join our community
- Submit a bug or feature request for the FOSS agent
- Submit a bug or feature request for the Netdata cloud