Skip to main content

3Com SNMP Traps

Plugin: go.d.plugin Module: snmp_traps

Overview

Receive, decode, and store SNMP traps and INFORMs from 3Com devices with Netdata. The bundled 3Com trap profile decodes 817 trap definitions across 103 MIBs into structured journal events with named, typed varbinds — searchable and filterable in the Logs tab.

Netdata's SNMP trap listener receives traps on UDP/162, matches them to the 3Com enterprise OID space, and decodes the varbinds using the bundled 3Com trap profile. No per-trap configuration.

This integration is supported on all platforms.

This integration supports multiple instances configured side-by-side.

Default Behavior

Auto-Detection

Traps from 3Com devices are decoded automatically once the device is pointed at the Agent's trap listener.

Limits

The default configuration for this integration does not impose any limits.

Performance Impact

The default configuration for this integration is not expected to impose a significant performance impact on the system.

Setup

You can configure the snmp_traps collector in two ways:

MethodBest forHow to
UIFast setup without editing filesGo to Nodes → Configure this node → Collectors → Jobs, search for snmp_traps, then click + to add a job.
FileIf you prefer configuring via file, or need to automate deployments (e.g., with Ansible)Edit go.d/snmp.conf and add a job.
important

UI configuration requires paid Netdata Cloud plan.

Prerequisites

SNMP access

SNMP must be enabled on the device and reachable from the Netdata Agent acting as the site's SNMP hub.

Configuration

Options

Configure the SNMP collector with the device hostname and SNMP credentials. See the SNMP collector reference for all options.

via UI

Configure the snmp_traps collector from the Netdata web interface:

  1. Go to Nodes.
  2. Select the node where you want the snmp_traps data-collection job to run and click the (Configure this node). That node will run the data collection.
  3. The Collectors → Jobs view opens by default.
  4. In the Search box, type snmp_traps (or scroll the list) to locate the snmp_traps collector.
  5. Click the + next to the snmp_traps collector to add a new job.
  6. Fill in the job fields, then click Test to verify the configuration and Submit to save.
    • Test runs the job with the provided settings and shows whether data can be collected.
    • If it fails, an error message appears with details (for example, connection refused, timeout, or command execution errors), so you can adjust and retest.

via File

The configuration file name for this integration is go.d/snmp.conf.

The file format is YAML. Generally, the structure is:

update_every: 1
autodetection_retry: 0
jobs:
- name: some_name1
- name: some_name2

You can edit the configuration file using the edit-config script from the Netdata config directory.

cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
sudo ./edit-config go.d/snmp.conf
Examples

There are no configuration examples.

Alerts

There are no alerts configured by default for this integration.

Metrics

Netdata decodes 817 trap definitions from 3Com across 103 MIBs into structured journal events. A trap is decoded only if the device actually sends it; inclusion here means the profile can decode it.

By severity: alert 46 · crit 140 · err 13 · warning 375 · notice 234 · info 9

By category: state_change 234 · config_change 40 · security 69 · auth 23 · license 1 · mobility 18 · diagnostic 432

Coverage by MIB

103 MIBs decoded — show per-MIB trap counts
MIBTrap definitions
C-PRODUCT-TRAP-MIB172
A3COM-HUAWEI-SRM-MIB38
A3COM-HUAWEI-DOT11-APMT-MIB37
A3COM-HUAWEI-EPON-MIB37
A3COM-HUAWEI-ENTITY-EXT-MIB34
LBHUB-BOOM-MIB28
A3COM-HUAWEI-LswTRAP-MIB24
A3COM-PRIVATE-MIB20
LBHUB-MSH-MIB19
A3COM-HUAWEI-IKE-MONITOR-MIB18
A3COM-HUAWEI-POWER-ETH-EXT-MIB18
A3COM-HUAWEI-PPP-OVER-SONET-MIB17
A3COM-HUAWEI-RPR-MIB14
A3COM-HUAWEI-IDS-MIB13
A3COM-HUAWEI-IPSEC-MONITOR-MIB11
A3COM-SWITCHING-SYSTEMS-FDDI-MIB11
LINKB-OPT-FDDI-MIB-1-1-211
A3COM-HUAWEI-ACFP-MIB10
A3COM-HUAWEI-MPLS-LDP-MIB10
A3COM-HUAWEI-TRAP-MIB10
A3COM-HUAWEI-DOT11-STATION-MIB9
A3COM-HUAWEI-DOT11-WIDS-MIB9
A3COM-SWITCHING-SYSTEMS-MIB9
LBHUB-ECS-MIB9
A3COM-HUAWEI-3GMODEM-MIB8
A3COM-HUAWEI-NQA-MIB8
A3COM-HUAWEI-PORT-SECURITY-MIB8
A3COM-HUAWEI-HGMP-MIB7
A3COM-HUAWEI-DOT11-ACMT-MIB6
A3COM-HUAWEI-LswMSTP-MIB6
LB3GH-1-0-76
A3COM-HUAWEI-COMMON-MIB5
A3COM-HUAWEI-DHCP-SERVER-MIB5
A3COM-HUAWEI-L2VPN-PWE3-MIB5
A3COM-HUAWEI-POSA-MIB5
A3COM-HUAWEI-WAPI-MIB5
SRAP-WCM-MIB5
A3Com-DLSW-r1-MIB4
A3COM-HUAWEI-DOT11-RRM-MIB4
A3COM-HUAWEI-DOT11-SA-MIB4
A3COM-HUAWEI-DVPN-MIB4
A3COM-HUAWEI-ISDN-MIB4
A3COM-HUAWEI-LAG-MIB4
A3COM-HUAWEI-LPBKDT-MIB4
A3COM-HUAWEI-LswRSTP-MIB4
A3COM-HUAWEI-MPLSOAM-MIB4
A3COM-HUAWEI-RRPP-MIB4
A3COM-HUAWEI-SSH-MIB4
A3COM-HUAWEI-WEB-AUTHENTICATION-MIB4
A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB4
A3COM-HUAWEI-CONFIG-MAN-MIB3
A3COM-HUAWEI-DOT11-CFG-MIB3
A3COM-HUAWEI-LI-MIB3
A3COM-HUAWEI-NDEC-MIB3
A3COM-HUAWEI-PPPOE-SERVER-MIB3
A3COM-HUAWEI-RADIUS-MIB3
A3COM-HUAWEI-SNA-DLSW-MIB3
A3COM-HUAWEI-SYS-MAN-MIB3
A3COM-HUAWEI-UI-MAN-MIB3
A3COM-HUAWEI-VOSIP-MIB3
LBHUB-BLC-MIB3
A3COM-HUAWEI-AFC-MIB2
A3COM-HUAWEI-BFD-STD-MIB2
A3COM-HUAWEI-CBQOS2-MIB2
A3COM-HUAWEI-CFCARD-MIB2
A3COM-HUAWEI-DLDP2-MIB2
A3COM-HUAWEI-DSP-MIB2
A3COM-HUAWEI-EFM-COMMON-MIB2
A3COM-HUAWEI-EPON-UNI-MIB2
A3COM-HUAWEI-FTM-MIB2
A3COM-HUAWEI-IF-EXT-MIB2
A3COM-HUAWEI-MAC-INFORMATION-MIB2
A3COM-HUAWEI-MPLS-LSR-MIB2
A3COM-HUAWEI-MPLSOAM-PS-MIB2
A3COM-HUAWEI-PORTAL-MIB2
A3COM-HUAWEI-STACK-MIB2
A3COM-HUAWEI-STORM-CONSTRAIN-MIB2
A3COM-HUWAEI-LswPERFORMANCE-MIB2
A3Com-Sdlc-r1-MIB2
A3COM-SWITCHING-SYSTEMS-POLL-MIB2
A3COM0304-RESILIENTLINKS2
H3C-TE-TUNNEL-MIB2
NCDCHASS-MIB2
SECURITY-MIB2
A3COM-HUAWEI-8021PAE-MIB1
A3COM-HUAWEI-AAL5-MIB1
A3COM-HUAWEI-ACL-MIB1
A3COM-HUAWEI-ARP-RATELIMIT-MIB1
A3COM-HUAWEI-DHCPSNOOP-MIB1
A3COM-HUAWEI-DLDP-MIB1
A3COM-HUAWEI-E1T1VI-MIB1
A3COM-HUAWEI-FLASH-MAN-MIB1
A3COM-HUAWEI-IP-ADDRESS-MIB1
A3COM-HUAWEI-LB-MIB1
A3COM-HUAWEI-LswMix-MIB1
A3COM-HUAWEI-NET-MAN-MIB1
A3COM-HUAWEI-PBR-MIB1
A3COM-HUAWEI-QOS-PROFILE-MIB1
A3COM-SWITCHING-SYSTEMS-QOS-MIB1
A3Com-System-r8-MIB1
A3COM0352-STACK-CONFIG1
LBHUB-BRIDGE-MIB1
PRESLEY-MIB1

Sample decoded traps

  • LBHUB-BOOM-MIB::deprRptrHealth
  • LBHUB-BOOM-MIB::deprRptrGroupChange
  • LBHUB-BOOM-MIB::deprRptrResetEvent
  • LBHUB-BOOM-MIB::heartbeatEvent
  • LBHUB-BOOM-MIB::localManagementUpdate

Do you have any feedback for this page? If so, you can open a new issue on our netdata/learn repository.