Skip to main content

Qtech LLC SNMP Traps

Plugin: go.d.plugin Module: snmp_traps

Overview​

Receive, decode, and store SNMP traps and INFORMs from Qtech LLC devices with Netdata. The bundled Qtech LLC trap profile decodes 360 trap definitions across 70 MIBs into structured journal events with named, typed varbinds — searchable and filterable in the Logs tab.

Netdata's SNMP trap listener receives traps on UDP/162, matches them to the Qtech LLC enterprise OID space, and decodes the varbinds using the bundled Qtech LLC trap profile. No per-trap configuration.

This integration is supported on all platforms.

This integration supports multiple instances configured side-by-side.

Default Behavior​

Auto-Detection​

Traps from Qtech LLC devices are decoded automatically once the device is pointed at the Agent's trap listener.

Limits​

The default configuration for this integration does not impose any limits.

Performance Impact​

The default configuration for this integration is not expected to impose a significant performance impact on the system.

Setup​

You can configure the snmp_traps collector in two ways:

MethodBest forHow to
UIFast setup without editing filesGo to Nodes → Configure this node → Collectors → Jobs, search for snmp_traps, then click + to add a job.
FileIf you prefer configuring via file, or need to automate deployments (e.g., with Ansible)Edit go.d/snmp.conf and add a job.
important

UI configuration requires paid Netdata Cloud plan.

Prerequisites​

SNMP access​

SNMP must be enabled on the device and reachable from the Netdata Agent acting as the site's SNMP hub.

Configuration​

Options​

Configure the SNMP collector with the device hostname and SNMP credentials. See the SNMP collector reference for all options.

via UI​

Configure the snmp_traps collector from the Netdata web interface:

  1. Go to Nodes.
  2. Select the node where you want the snmp_traps data-collection job to run and click the ⚙ (Configure this node). That node will run the data collection.
  3. The Collectors → Jobs view opens by default.
  4. In the Search box, type snmp_traps (or scroll the list) to locate the snmp_traps collector.
  5. Click the + next to the snmp_traps collector to add a new job.
  6. Fill in the job fields, then click Test to verify the configuration and Submit to save.
    • Test runs the job with the provided settings and shows whether data can be collected.
    • If it fails, an error message appears with details (for example, connection refused, timeout, or command execution errors), so you can adjust and retest.

via File​

The configuration file name for this integration is go.d/snmp.conf.

The file format is YAML. Generally, the structure is:

update_every: 1
autodetection_retry: 0
jobs:
  - name: some_name1
  - name: some_name2

You can edit the configuration file using the edit-config script from the Netdata config directory.

cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
sudo ./edit-config go.d/snmp.conf
Examples​

There are no configuration examples.

Alerts​

There are no alerts configured by default for this integration.

Metrics​

Netdata decodes 360 trap definitions from Qtech LLC across 70 MIBs into structured journal events. A trap is decoded only if the device actually sends it; inclusion here means the profile can decode it.

By severity: alert 27 · crit 11 · err 6 · warning 150 · notice 157 · info 9

By category: state_change 144 · config_change 16 · security 41 · auth 6 · mobility 18 · diagnostic 135

Coverage by MIB​

70 MIBs decoded — show per-MIB trap counts
MIBTrap definitions
QTECH-WLAN-FIT-AP-CF-MIB42
QTECH-WLAN-FAT-AP-CF-MIB35
QTECH-SYSTEM-MIB25
QTECH-DDM-MIB21
QTECH-RRM-MIB19
QTECH-AC-MGMT-MIB17
QTECH-3G-MIB14
QTECH-MPLSOAM-MIB12
QTECH-DHCP6-MIB10
ETHIF-MIB9
QTECH-CM-WAPI-MIB9
QTECH-DOT11-WIDS-MIB9
QTECH-CAPWAP-APP-MIB8
QTECH-4G-MIB6
QTECH-ARP-MIB6
QTECH-GBNPlatformGNLink-MIB6
QTECH-LACP-MIB6
QTECH-SLOT-MIB6
QTECH-AUTH-GATEWAY-MIB5
QTECH-WLAN-WLOG-MIB5
QTECH-CLUSTER-MIB4
QTECH-VSU-MIB4
QTECH-VTP-MIB4
QTECH-CAPWAP-DHCP-MIB3
QTECH-CPU-MIB3
QTECH-GBNPlatformOAM-MIB3
QTECH-RLINK-MIB3
QTECH-TEMP-FAN-MIB3
QTECH-WLAN-FIT-AP-IN-MIB3
STPU-MIB3
QTECH-BFD-MIB2
QTECH-CM-PORTAL-MIB2
QTECH-ENTITY-MIB2
QTECH-GBNDeviceSwitch-MIB2
QTECH-GBNServiceRMON-MIB2
QTECH-IPSEC-MIB2
QTECH-IPSEC2-MIB2
QTECH-L2TP-MIB2
QTECH-L2TPV2-MIB2
QTECH-LOOPCHECK-MIB2
QTECH-MIB-MIB2
QTECH-POE-MIB2
QTECH-SMM-MIB2
QTECH-SMP-MIB2
QTECH-VPLS-GENERIC-MIB2
QTECH-VXU-MIB2
UDLD-MIB2
LLDPPriv-MIB1
QTECH-ADDRESS-MIB1
QTECH-CAPWAP-MOBILITY-MIB1
QTECH-DEVICE-MIB1
QTECH-DHCP-SNOOPING-MIB1
QTECH-DVMRPINTEROPERABILITY-MIB1
QTECH-FILE-MIB1
QTECH-G8032-MIB1
QTECH-GBNPlatformOAMSyslog-MIB1
QTECH-IGMP-MIB1
QTECH-INTERFACE-MIB1
QTECH-IP-PRIVATE-MIB1
QTECH-IPSG-MIB1
QTECH-NFPP-MIB1
QTECH-PIM-MIB1
QTECH-SECURITY-MIB1
QTECH-SECZONE-MIB1
QTECH-TRAFFIC-CTRL-MIB1
QTECH-URPF-MIB1
QTECH-VM-MIB1
QTECH-WLAN-FAT-AP-IN-MIB1
QTECH-WLAN-HOTBACKUP-MIB1
QTECH-WLAN-SECURITY-MIB1

Sample decoded traps​

  • QTECH-GBNPlatformOAM-MIB::cpuBusyTrap
  • QTECH-GBNPlatformOAM-MIB::cpuUnbusyTrap
  • QTECH-GBNPlatformOAM-MIB::snmpNotifyTypeSaveConfiguration
  • QTECH-GBNPlatformOAMSyslog-MIB::syslogTrap
  • QTECH-GBNPlatformGNLink-MIB::ggmpClientPortLoop
Last updated on

Do you have any feedback for this page? If so, you can open a new issue on our netdata/learn repository.