Skip to main content

Step 2. Get to know Netdata's dashboard

Welcome to Netdata proper! Now that you understand how Netdata works, how it's built, and why we built it, you can start working with the dashboard directly.

This step-by-step guide assumes you've already installed Netdata on a system of yours. If you haven't yet, hop back over to "step 0" for information about our one-line installer script. Or, view the installation docs to learn more. Once you have Netdata installed, you can hop back over here and dig in.

What you'll learn in this step

In this step of the Netdata guide, you'll learn how to:

Let's get started!

Visit and explore the dashboard

Netdata's dashboard is where you interact with your system's metrics. Time to open it up and start exploring. Open up your browser of choice.

Open up your web browser of choice and navigate to http://NODE:19999, replacing NODE with the IP address or hostname of your Agent. If you're unsure, try http://localhost:19999 first. Hit Enter. Welcome to Netdata!

Animated GIF of navigating to the

From here on out in this guide, we'll refer to the address you use to view your dashboard as NODE. Be sure to replace it with either localhost, the IP address, or the hostname of your system.

Explore available charts using menus

Menus are located on the right-hand side of the Netdata dashboard. You can use these to navigate to the charts you're interested in.

Animated GIF of using the menus and

Netdata shows all its charts on a single page, so you can also scroll up and down using the mouse wheel, your touchscreen/touchpad, or the scrollbar.

Both menus and the items displayed beneath them, called submenus, are populated automatically by Netdata based on what it's collecting. If you run Netdata on many different systems using different OS types or versions, the menus and submenus may look a little different for each one.

To learn more about menus, see our documentation about navigating the standard dashboard.

❗ By default, Netdata only creates and displays charts if the metrics are not zero. So, you may be missing some charts, menus, and submenus if those charts have zero metrics. You can change this by changing the Which dimensions to show? setting to All. In addition, if you start Netdata and immediately load the dashboard, not all charts/menus/submenus may be displayed, as some collectors can take a while to initialize.

Read the descriptions accompanying charts

Many charts come with a short description of what dimensions the chart is displaying and why they matter.

For example, here's the description that accompanies the swap chart.

Screenshot of the swap

If you're new to health monitoring and performance troubleshooting, we recommend you spend some time reading these descriptions and learning more at the pages linked above.

Understand charts, dimensions, families, and contexts

A chart is an interactive visualization of one or more collected/calculated metrics. You can see the name (also known as its unique ID) of a chart by looking at the top-left corner of a chart and finding the parenthesized text. On a Linux system, one of the first charts on the dashboard will be the system CPU chart, with the name system.cpu:

Screenshot of the system CPU chart in the Netdata

A dimension is any value that gets shown on a chart. The value can be raw data or calculated values, such as percentages, aggregates, and more. Most charts will have more than one dimension, in which case it will display each in a different color. Here, a system.cpu chart is showing many dimensions, such as user, system, softirq, irq, and more.

Screenshot of the dimensions shown in the system CPU chart in the Netdata

A family is one instance of a monitored hardware or software resource that needs to be monitored and displayed separately from similar instances. For example, if your system has multiple partitions, Netdata will create different families for /, /boot, /home, and so on. Same goes for entire disks, network devices, and more.

A number of families created for disk partitions

A context groups several charts based on the types of metrics being collected and displayed. For example, the Disk section often has many contexts:, disk.ops, disk.backlog, disk.util, and so on. Netdata uses this context to create individual charts and then groups them by family. You can always see the context of any chart by looking at its name or hovering over the chart's date.

It's important to understand these differences, as Netdata uses charts, dimensions, families, and contexts to create health alarms and configure collectors. To read even more about the differences between all these elements of the dashboard, and how they affect other parts of Netdata, read our dashboards documentation.

Interact with charts

We built Netdata to be a big sandbox for learning more about your systems and applications. Time to play!

Netdata's charts are fully interactive. You can pan through historical metrics, zoom in and out, select specific timeframes for further analysis, resize charts, and more.

Best of all, Whenever you use a chart in this way, Netdata synchronizes all the other charts to match it.

Animated GIF of the standard Netdata dashboard being manipulated and synchronizing

Pan, zoom, highlight, and reset charts

You can change how charts show their metrics in a few different ways, each of which have a few methods:

ChangeMethod #1Method #2Method #3
Reset charts to default auto-refreshing statedouble clickdouble tap (touchpad/touchscreen)
Select a certain timeframeALT + mouse selection + mouse selection (macOS)
Pan forward or back in timeclick and dragtouch and drag (touchpad/touchscreen)
Zoom to a specific timeframeSHIFT + mouse selection
Zoom in/outSHIFT/ALT + mouse scrollwheelSHIFT/ALT + two-finger pinch (touchpad/touchscreen)SHIFT/ALT + two-finger scroll (touchpad/touchscreen)

These interactions can also be triggered using the icons on the bottom-right corner of every chart. They are, respectively, Pan Left, Reset, Pan Right, Zoom In, and Zoom Out.

Show and hide dimensions

Each dimension can be hidden by clicking on it. Hiding dimensions simplifies the chart and can help you better discover exactly which aspect of your system is behaving strangely.

Resize charts

Additionally, resize charts by clicking-and-dragging the icon on the bottom-right corner of any chart. To restore the chart to its original height, double-click the same icon.

Animated GIF of resizing a chart and resetting it to the default

To learn more about other options and chart interactivity, read our dashboard documentation.

See raised alarms and the alarm log

Aside from performance troubleshooting, the Agent helps you monitor the health of your systems and applications. That's why every Netdata installation comes with dozens of pre-configured alarms that trigger alerts when your system starts acting strangely.

Find the Alarms button in the top navigation bring up a modal that shows currently raised alarms, all running alarms, and the alarms log.

Here is an example of a raised system.cpu alarm, followed by the full list and alarm log:

Animated GIF of looking at raised alarms and the alarm

And a static screenshot of the raised CPU alarm:

Screenshot of a raised system CPU alarm

The alarm itself is named *system - cpu**, and its context is system.cpu. Beneath that is an auto-updating badge that shows the latest value the chart that triggered the alarm.

With the three icons beneath that and the role designation, you can:

  1. Scroll to the chart associated with this raised alarm.
  2. Copy a link to the badge to your clipboard.
  3. Copy the code to embed the badge onto another web page using an <embed> element.

The table on the right-hand side displays information about the alarm's configuration. In above example, Netdata triggers a warning alarm when CPU usage is between 75 and 85%, and a critical alarm when above 85%. It's a little more complicated than that, but we'll get into more complex health entity configurations in a later step.

The calculation field is the equation used to calculate those percentages, and the check every field specifies how often Netdata should be calculating these metrics to see if the alarm should remain triggered.

The execute field tells Netdata how to notify you about this alarm, and the source field lets you know where you can find the configuration file, if you'd like to edit its configuration.

We'll cover alarm configuration in more detail later in the guide, so don't worry about it too much for now! Right now, it's most important that you understand how to see alarms, and parse their details, if and when they appear on your system.

What's next?

In this step of the Netdata guide, you learned how to:

  • Visit the dashboard
  • Explore available charts (using the right-side menu)
  • Read the descriptions accompanying charts
  • Interact with charts
  • See raised alarms and the alarm log

Next, you'll learn how to monitor multiple nodes through the dashboard.

Next: Monitor more than one system with Netdata →

Was this page helpful?