Skip to main content

net.inet6.icmp6.stats

Plugin: freebsd.plugin Module: net.inet6.icmp6.stats

Overview

Collect information abou IPv6 ICMP

The plugin calls sysctl function to collect necessary data.

This collector is supported on all platforms.

This collector supports collecting metrics from multiple instances of this integration, including remote instances.

Default Behavior

Auto-Detection

This integration doesn't support auto-detection.

Limits

The default configuration for this integration does not impose any limits on data collection.

Performance Impact

The default configuration for this integration is not expected to impose a significant performance impact on the system.

Metrics

Metrics grouped by scope.

The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels.

Per net.inet6.icmp6.stats instance

Collect IPv6 ICMP traffic statistics.

This scope has no labels.

Metrics:

MetricDimensionsUnit
ipv6.icmpreceived, sentmessages/s
ipv6.icmpredirreceived, sentredirects/s
ipv6.icmperrorsInErrors, OutErrors, InCsumErrors, InDestUnreachs, InPktTooBigs, InTimeExcds, InParmProblems, OutDestUnreachs, OutTimeExcds, OutParmProblemserrors/s
ipv6.icmpechosInEchos, OutEchos, InEchoReplies, OutEchoRepliesmessages/s
ipv6.icmprouterInSolicits, OutSolicits, InAdvertisements, OutAdvertisementsmessages/s
ipv6.icmpneighborInSolicits, OutSolicits, InAdvertisements, OutAdvertisementsmessages/s
ipv6.icmptypesInType1, InType128, InType129, InType136, OutType1, OutType128, OutType129, OutType133, OutType135, OutType143messages/s

Alerts

There are no alerts configured by default for this integration.

Setup

Prerequisites

No action required.

Configuration

File

The configuration file name for this integration is netdata.conf. Configuration for this specific integration is located in the [plugin:freebsd:net.inet6.icmp6.stats] section within that file.

The file format is a modified INI syntax. The general structure is:

[section1]
option1 = some value
option2 = some other value

[section2]
option3 = some third value

You can edit the configuration file using the edit-config script from the Netdata config directory.

cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
sudo ./edit-config netdata.conf

Options

Config options
NameDescriptionDefaultRequired
icmpEnable or disable ICMP metric.autono
icmp redirectsEnable or disable ICMP redirects metric.autono
icmp errorsEnable or disable ICMP errors metric.autono
icmp echosEnable or disable ICMP echos metric.autono
icmp routerEnable or disable ICMP router metric.autono
icmp neighborEnable or disable ICMP neighbor metric.autono
icmp typesEnable or disable ICMP types metric.autono

Examples

There are no configuration examples.


Do you have any feedback for this page? If so, you can open a new issue on our netdata/learn repository.