Daemon Configuration Reference

The Netdata daemon's main configuration file is located at /INSTALL_PREFIX/netdata/netdata.conf. While Netdata works effectively with default settings, this file allows you to fine-tune its behavior.

You can view your current configuration, including default values, at http://IP:19999/netdata.conf. Access to this URL is restricted to local IPs by default.

The configuration file uses an INI-style format with [SECTION] headers:

Section	Controls
[global]	Daemon
[db]	Database
[directories]	Directories used by Netdata
[logs]	Logging
[environment variables]	Environment variables
[sqlite]	SQLite
[ml]	Machine Learning
[health]	Health monitoring
[web]	Web Server
[registry]	Registry
[global statistics]	Internal monitoring
[statsd]	StatsD plugin
[plugins]	Data collection Plugins (Collectors)
[plugin:NAME]	Individual Plugins

Note

The configuration uses a simple name = value format. Netdata tolerates unknown options, marking them with comments when viewing the running configuration through /netdata.conf.

Applying changes

After netdata.conf has been modified, Netdata needs to be restarted for changes to apply.

Configuration Sections

global section options

setting	default	info
process scheduling policy	keep	See Netdata process scheduling policy
OOM score	0
glibc malloc arena max for plugins	1
glibc malloc arena max for Netdata	1
hostname	auto-detected	The hostname of the computer running Netdata.
host access prefix	empty	This is used in Docker environments where /proc, /sys, etc have to be accessed via another path. You may also have to set SYS_PTRACE capability on the docker for this work. Check issue 43.
timezone	auto-detected	The timezone retrieved from the environment variable
run as user	netdata	The user Netdata will run as.
pthread stack size	auto-detected

db section options

setting	default	info
mode	dbengine	dbengine: The default for long-term metrics storage with efficient RAM and disk usage. Can be extended with dbengine page cache size and dbengine tier X retention size. ram: The round-robin database will be temporary and it will be lost when Netdata exits. alloc: Similar to ram, but can significantly reduce memory usage, when combined with a low retention and does not support KSM. none: Disables the database at this host, and disables Health monitoring entirely, as that requires a database of metrics. Not to be used together with streaming.
retention	3600	Used with mode = ram/alloc, not the default mode = dbengine. This number reflects the number of entries the netdata daemon will by default keep in memory for each chart dimension. Check Memory Requirements for more information.
storage tiers	3	The number of storage tiers you want to have in your dbengine. Check the tiering mechanism in the dbengine's reference. You can have up to 5 tiers of data (including the Tier 0). This number ranges between 1 and 5.
dbengine page cache size	32MiB	Determines the amount of RAM in MiB that is dedicated to caching for Tier 0 Netdata metric values.
dbengine tier N retention size	1GiB	The disk space dedicated to metrics storage, per tier. Can be used in single-node environments as well. N belongs to [1..4]
dbengine tier N retention time	14d, 3mo, 1y, 1y, 1y	The database retention, expressed in time. Can be used in single-node environments as well. N belongs to [1..4]
update every	1	The frequency in seconds, for data collection. For more information see the performance guide. These metrics stored as Tier 0 data. Explore the tiering mechanism in the dbengine's reference.
dbengine tier N update every iterations	60	The down sampling value of each tier from the previous one. For each Tier, the greater by one Tier has N (equal to 60 by default) less data points of any metric it collects. This setting can take values from 2 up to 255. N belongs to [1..4]
dbengine tier back fill	new	Specifies the strategy of recreating missing data on higher database Tiers. new: Sees the latest point on each Tier and save new points to it only if the exact lower Tier has available points for it's observation window (dbengine tier N update every iterations window). none: No back filling is applied. N belongs to [1..4]
memory deduplication (ksm)	yes	When set to yes, Netdata will offer its in-memory round robin database and the dbengine page cache to kernel same page merging (KSM) for deduplication.
cleanup obsolete charts after	1h	See monitoring ephemeral containers, also sets the timeout for cleaning up obsolete dimensions
gap when lost iterations above	1
cleanup orphan hosts after	1h	How long to wait until automatically removing from the DB a remote Netdata host (child) that is no longer sending data.
enable zero metrics	no	Set to yes to show charts when all their metrics are zero.

Info

The multiplication of all the enabled tiers dbengine tier N update every iterations values must be less than 65535.

directories section options

setting	default	info
config	/etc/netdata	The directory configuration files are kept.
stock config	/usr/lib/netdata/conf.d
log	/var/log/netdata	The directory in which the log files are kept.
web	/usr/share/netdata/web	The directory the web static files are kept.
cache	/var/cache/netdata	The directory the memory database will be stored if and when Netdata exits. Netdata will re-read the database when it will start again, to continue from the same point.
lib	/var/lib/netdata	Contains the Alert log and the Netdata instance GUID.
home	/var/cache/netdata	Contains the db files for the collected metrics.
lock	/var/lib/netdata/lock	Contains the data collectors lock files.
plugins	"/usr/libexec/netdata/plugins.d" "/etc/netdata/custom-plugins.d"	The directory plugin programs are kept. This setting supports multiple directories, space separated. If any directory path contains spaces, enclose it in single or double quotes.
Health config	/etc/netdata/health.d	The directory containing the user Alert configuration files, to override the stock configurations
stock Health config	/usr/lib/netdata/conf.d/health.d	Contains the stock Alert configuration files for each collector
registry	/opt/netdata/var/lib/netdata/registry	Contains the registry database and GUID that uniquely identifies each Netdata Agent

logs section options

There are additional configuration options for the logs. For more info, see Netdata Logging.

setting	default	info
debug flags	0x0000000000000000	Bitmap of debug options to enable. For more information check Tracing Options.
debug	/var/log/netdata/debug.log	The filename to save debug information. This file will not be created if debugging is not enabled. You can also set it to syslog to send the debug messages to syslog, or off to disable this log. For more information check Tracing Options.
error	/var/log/netdata/error.log	The filename to save error messages for Netdata daemon and all plugins (stderr is sent here for all Netdata programs, including the plugins). You can also set it to syslog to send the errors to syslog, or off to disable this log.
access	/var/log/netdata/access.log	The filename to save the log of web clients accessing Netdata charts. You can also set it to syslog to send the access log to syslog, or off to disable this log.
collector	journal	The filename to save the log of Netdata collectors. You can also set it to syslog to send the access log to syslog, or off to disable this log. Defaults to Journal if using systemd.
Health	journal	The filename to save the log of Netdata Health collectors. You can also set it to syslog to send the access log to syslog, or off to disable this log. Defaults to Journal if using systemd.
daemon	journal	The filename to save the log of Netdata daemon. You can also set it to syslog to send the access log to syslog, or off to disable this log. Defaults to Journal if using systemd.
facility	daemon	A facility keyword is used to specify the type of system that is logging the message.
logs flood protection period	1m	Length of period during which the number of errors should not exceed the errors to trigger flood protection.
logs to trigger flood protection	1000	Number of errors written to the log in errors flood protection period sec before flood protection is activated.
level	info	Controls which log messages are logged, with error being the most important. Supported values: info and error.

environment variables section options

setting	default	info
TZ	:/etc/localtime	Where to find the timezone
PATH	auto-detected	Specifies the directories to be searched to find a command
PYTHONPATH		Used to set a custom python path

sqlite section options

setting	default	info
auto vacuum	INCREMENTAL	The auto-vacuum status in the database
synchronous	NORMAL	The setting of the "synchronous" flag
journal mode	WAL	The journal mode for databases
temp store	MEMORY	Used to determine where temporary tables and indices are stored
journal size limit	16777216	Used to set a new limit in bytes for the database
cache size	-2000	Used to suggest the maximum number of database disk pages that SQLite will hold in memory at once per open database file

health section options

This section controls the general behavior of the Health monitoring capabilities of Netdata.

Specific Alerts are configured in per-collector config files under the health.d directory. For more info, see health monitoring.

Alert notifications are configured in health_alarm_notify.conf.

setting	default	info
enabled	yes	Set to no to disable all Alerts and notifications
in memory max Health log entries	1000	Size of the Alert history held in RAM
script to execute on alarm	/usr/libexec/netdata/plugins.d/alarm-notify.sh	The script that sends Alert notifications. Note that in versions before 1.16, the plugins.d directory may be installed in a different location in certain OSs (e.g. under /usr/lib/netdata).
run at least every	10s	Controls how often all Alert conditions should be evaluated.
postpone alarms during hibernation for	1m	Prevents false Alerts. May need to be increased if you get Alerts during hibernation.
Health log retention	5d	Specifies the history of Alert events (in seconds) kept in the Agent's sqlite database.
enabled alarms	*	Defines which Alerts to load from both user and stock directories. This is a simple pattern list of Alert or template names. Can be used to disable specific Alerts. For example, enabled alarms = !oom_kill * will load all Alerts except oom_kill.

web section options

Refer to the web server documentation

plugins section options

In this section you will see be a boolean (yes/no) option for each plugin (e.g., tc, cgroups, apps, proc etc.). Note that the configuration options in this section for the orchestrator plugins python.d and charts.d control all the modules written for that orchestrator. For instance, setting python.d = no means that all Python modules under collectors/python.d.plugin will be disabled.

Additionally, there will be the following options:

setting	default	info
enable running new plugins	yes	When set to yes, Netdata will enable detected plugins, even if they are not configured explicitly. Setting this to no will only enable plugins explicitly configured in this file with a yes
check for new plugins every	60	The time in seconds to check for new plugins in the plugins directory. This allows having other applications dynamically creating plugins for Netdata.
checks	no	This is a debugging plugin for the internal latency

registry section options

To understand what this section is and how it should be configured, refer to the registry documentation.

Per-plugin configuration

The configuration options for plugins appear in sections following the pattern [plugin:NAME].

Internal plugins

Most internal plugins will provide additional options. Check Internal Plugins for more information.

Note that by default, Netdata will enable monitoring metrics for disks, memory, and network only when they are not zero. If they are constantly zero, they are ignored. Metrics that will start having values, after Netdata is started, will be detected and charts will be automatically added to the dashboard when refreshed. Use yes instead of auto in plugin configuration sections to enable these charts permanently. You can also set the enable zero metrics option to yes in the [global] section which enables charts with zero metrics for all internal Netdata plugins.

External plugins

External plugins will have only two options at netdata.conf:

setting	default	info
update every	the value of [global].update every setting	The frequency in seconds the plugin should collect values. For more information check the performance guide.
command options	-	Additional command line options to pass to the plugin.

External plugins that need additional configuration may support a dedicated file in /etc/netdata. Check their documentation.