macOS

Plugin: macos.plugin Module: mach_smi

Overview

Monitor macOS metrics for efficient operating system performance.

The plugin uses three different methods to collect data:

• The function sysctlbyname is called to collect network, swap, loadavg, and boot time.
• The functtion host_statistic is called to collect CPU and Virtual memory data;
• The function IOServiceGetMatchingServices to collect storage information.

This collector is only supported on the following platforms:

• macOS

This collector only supports collecting metrics from a single instance of this integration.

Default Behavior

Auto-Detection

This integration doesn't support auto-detection.

Limits

The default configuration for this integration does not impose any limits on data collection.

Performance Impact

The default configuration for this integration is not expected to impose a significant performance impact on the system.

Metrics

Metrics grouped by scope.

The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels.

Per macOS instance

These metrics refer to hardware and network monitoring.

This scope has no labels.

Metrics:

Metric	Dimensions	Unit
system.cpu	user, nice, system, idle	percentage
system.ram	active, wired, throttled, compressor, inactive, purgeable, speculative, free	MiB
mem.swapio	io, out	KiB/s
mem.pgfaults	memory, cow, pagein, pageout, compress, decompress, zero_fill, reactivate, purge	faults/s
system.load	load1, load5, load15	load
mem.swap	free, used	MiB
system.ipv4	received, sent	kilobits/s
ipv4.tcppackets	received, sent	packets/s
ipv4.tcperrors	InErrs, InCsumErrors, RetransSegs	packets/s
ipv4.tcphandshake	EstabResets, ActiveOpens, PassiveOpens, AttemptFails	events/s
ipv4.tcpconnaborts	baddata, userclosed, nomemory, timeout	connections/s
ipv4.tcpofo	inqueue	packets/s
ipv4.tcpsyncookies	received, sent, failed	packets/s
ipv4.ecnpkts	CEP, NoECTP	packets/s
ipv4.udppackets	received, sent	packets/s
ipv4.udperrors	RcvbufErrors, InErrors, NoPorts, InCsumErrors, IgnoredMulti	events/s
ipv4.icmp	received, sent	packets/s
ipv4.icmp_errors	InErrors, OutErrors, InCsumErrors	packets/s
ipv4.icmpmsg	InEchoReps, OutEchoReps, InEchos, OutEchos	packets/s
ipv4.packets	received, sent, forwarded, delivered	packets/s
ipv4.fragsout	ok, failed, created	packets/s
ipv4.fragsin	ok, failed, all	packets/s
ipv4.errors	InDiscards, OutDiscards, InHdrErrors, OutNoRoutes, InAddrErrors, InUnknownProtos	packets/s
ipv6.packets	received, sent, forwarded, delivers	packets/s
ipv6.fragsout	ok, failed, all	packets/s
ipv6.fragsin	ok, failed, timeout, all	packets/s
ipv6.errors	InDiscards, OutDiscards, InHdrErrors, InAddrErrors, InTruncatedPkts, InNoRoutes, OutNoRoutes	packets/s
ipv6.icmp	received, sent	messages/s
ipv6.icmpredir	received, sent	redirects/s
ipv6.icmperrors	InErrors, OutErrors, InCsumErrors, InDestUnreachs, InPktTooBigs, InTimeExcds, InParmProblems, OutDestUnreachs, OutTimeExcds, OutParmProblems	errors/s
ipv6.icmpechos	InEchos, OutEchos, InEchoReplies, OutEchoReplies	messages/s
ipv6.icmprouter	InSolicits, OutSolicits, InAdvertisements, OutAdvertisements	messages/s
ipv6.icmpneighbor	InSolicits, OutSolicits, InAdvertisements, OutAdvertisements	messages/s
ipv6.icmptypes	InType1, InType128, InType129, InType136, OutType1, OutType128, OutType129, OutType133, OutType135, OutType143	messages/s
system.uptime	uptime	seconds
system.io	in, out	KiB/s

Per disk

This scope has no labels.

Metrics:

Metric	Dimensions	Unit
disk.io	read, writes	KiB/s
disk.ops	read, writes	operations/s
disk.util	utilization	% of time working
disk.iotime	reads, writes	milliseconds/s
disk.await	reads, writes	milliseconds/operation
disk.avgsz	reads, writes	KiB/operation
disk.svctm	svctm	milliseconds/operation

Per mount point

This scope has no labels.

Metrics:

Metric	Dimensions	Unit
disk.space	avail, used, reserved_for_root	GiB
disk.inodes	avail, used, reserved_for_root	inodes

Per network device

This scope has no labels.

Metrics:

Metric	Dimensions	Unit
net.net	received, sent	kilobits/s
net.packets	received, sent, multicast_received, multicast_sent	packets/s
net.errors	inbound, outbound	errors/s
net.drops	inbound	drops/s
net.events	frames, collisions, carrier	events/s

Alerts

The following alerts are available:

Alert name	On metric	Description
interface_speed	net.net	network interface ${label:device} current speed

Setup

Prerequisites

No action required.

Configuration

Options

There are three sections in the file which you can configure:

• [plugin:macos:sysctl] - Enable or disable monitoring for network, swap, loadavg, and boot time.
• [plugin:macos:mach_smi] - Enable or disable monitoring for CPU and Virtual memory.
• [plugin:macos:iokit] - Enable or disable monitoring for storage device.

Config options

Option	Description	Default	Required
enable load average	Enable or disable monitoring of load average metrics (load1, load5, load15).	yes	no
system swap	Enable or disable monitoring of system swap metrics (free, used).	yes	no
bandwidth	Enable or disable monitoring of network bandwidth metrics (received, sent).	yes	no
ipv4 TCP packets	Enable or disable monitoring of IPv4 TCP total packets metrics (received, sent).	yes	no
ipv4 TCP errors	Enable or disable monitoring of IPv4 TCP packets metrics (Input Errors, Checksum, Retransmission segments).	yes	no
ipv4 TCP handshake issues	Enable or disable monitoring of IPv4 TCP handshake metrics (Established Resets, Active Opens, Passive Opens, Attempt Fails).	yes	no
ECN packets	Enable or disable monitoring of ECN statistics metrics (InCEPkts, InNoECTPkts).	auto	no
TCP SYN cookies	Enable or disable monitoring of TCP SYN cookies metrics (received, sent, failed).	auto	no
TCP out-of-order queue	Enable or disable monitoring of TCP out-of-order queue metrics (inqueue).	auto	no
TCP connection aborts	Enable or disable monitoring of TCP connection aborts metrics (Bad Data, User closed, No memory, Timeout).	auto	no
ipv4 UDP packets	Enable or disable monitoring of ipv4 UDP packets metrics (sent, received.).	yes	no
ipv4 UDP errors	Enable or disable monitoring of ipv4 UDP errors metrics (Recieved Buffer error, Input Errors, No Ports, IN Checksum Errors, Ignore Multi).	yes	no
ipv4 icmp packets	Enable or disable monitoring of IPv4 ICMP packets metrics (sent, received, in error, OUT error, IN Checksum error).	yes	no
ipv4 icmp messages	Enable or disable monitoring of ipv4 ICMP messages metrics (I/O messages, I/O Errors, In Checksum).	yes	no
ipv4 packets	Enable or disable monitoring of ipv4 packets metrics (received, sent, forwarded, delivered).	yes	no
ipv4 fragments sent	Enable or disable monitoring of IPv4 fragments sent metrics (ok, fails, creates).	yes	no
ipv4 fragments assembly	Enable or disable monitoring of IPv4 fragments assembly metrics (ok, failed, all).	yes	no
ipv4 errors	Enable or disable monitoring of IPv4 errors metrics (I/O discard, I/O HDR errors, In Addr errors, In Unknown protos, OUT No Routes).	yes	no
ipv6 packets	Enable or disable monitoring of IPv6 packets metrics (received, sent, forwarded, delivered).	auto	no
ipv6 fragments sent	Enable or disable monitoring of IPv6 fragments sent metrics (ok, failed, all).	auto	no
ipv6 fragments assembly	Enable or disable monitoring of IPv6 fragments assembly metrics (ok, failed, timeout, all).	auto	no
ipv6 errors	Enable or disable monitoring of IPv6 errors metrics (I/O Discards, In Hdr Errors, In Addr Errors, In Truncaedd Packets, I/O No Routes).	auto	no
icmp	Enable or disable monitoring of ICMP metrics (sent, received).	auto	no
icmp redirects	Enable or disable monitoring of ICMP redirects metrics (received, sent).	auto	no
icmp errors	Enable or disable monitoring of ICMP metrics (I/O Errors, In Checksums, In Destination Unreachable, In Packet too big, In Time Exceeds, In Parm Problem, Out Dest Unreachable, Out Timee Exceeds, Out Parm Problems.).	auto	no
icmp echos	Enable or disable monitoring of ICMP echos metrics (I/O Echos, I/O Echo Reply).	auto	no
icmp router	Enable or disable monitoring of ICMP router metrics (I/O Solicits, I/O Advertisements).	auto	no
icmp neighbor	Enable or disable monitoring of ICMP neighbor metrics (I/O Solicits, I/O Advertisements).	auto	no
icmp types	Enable or disable monitoring of ICMP types metrics (I/O Type1, I/O Type128, I/O Type129, Out Type133, Out Type135, In Type136, Out Type145).	auto	no
space usage for all disks	Enable or disable monitoring of space usage for all disks metrics (available, used, reserved for root).	yes	no
inodes usage for all disks	Enable or disable monitoring of inodes usage for all disks metrics (available, used, reserved for root).	yes	no
bandwidth	Enable or disable monitoring of bandwidth metrics (received, sent).	yes	no
system uptime	Enable or disable monitoring of system uptime metrics (uptime).	yes	no
cpu utilization	Enable or disable monitoring of CPU utilization metrics (user, nice, system, idel).	yes	no
system ram	Enable or disable monitoring of system RAM metrics (Active, Wired, throttled, compressor, inactive, purgeable, speculative, free).	yes	no
swap i/o	Enable or disable monitoring of SWAP I/O metrics (I/O Swap).	yes	no
memory page faults	Enable or disable monitoring of memory page faults metrics (memory, cow, I/O page, compress, decompress, zero fill, reactivate, purge).	yes	no
disk i/o	Enable or disable monitoring of disk I/O metrics (In, Out).	yes	no

via File

The configuration file name for this integration is netdata.conf.

The file format is a modified INI syntax. The general structure is:

[section1]
    option1 = some value
    option2 = some other value

[section2]
    option3 = some third value

You can edit the configuration file using the edit-config script from the Netdata config directory.

cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
sudo ./edit-config netdata.conf

Examples

Disable swap monitoring.

A basic example that discards swap monitoring

Config

[plugin:macos:sysctl]
  system swap = no
[plugin:macos:mach_smi]
  swap i/o = no

Disable complete Machine SMI section.

A basic example that discards swap monitoring

Config

[plugin:macos:mach_smi]
  cpu utilization = no
  system ram = no
  swap i/o = no
  memory page faults = no
  disk i/o = no