ZooKeeper

Plugin: go.d.plugin Module: zookeeper

Overview

It connects to the Zookeeper instance via a TCP and executes the following commands:

• mntr.

This collector is supported on all platforms.

This collector supports collecting metrics from multiple instances of this integration, including remote instances.

Default Behavior

Auto-Detection

By default, it detects instances running on localhost by attempting to connect using known ZooKeeper TCP sockets:

• 127.0.0.1:2181
• 127.0.0.1:2182

Limits

The default configuration for this integration does not impose any limits on data collection.

Performance Impact

The default configuration for this integration is not expected to impose a significant performance impact on the system.

Metrics

Metrics grouped by scope.

The scope defines the instance that the metric belongs to. An instance is uniquely identified by a set of labels.

Per ZooKeeper instance

These metrics refer to the entire monitored application.

This scope has no labels.

Metrics:

Metric	Dimensions	Unit
zookeeper.requests	outstanding	requests
zookeeper.requests_latency	min, avg, max	ms
zookeeper.connections	alive	connections
zookeeper.packets	received, sent	pps
zookeeper.file_descriptor	open	file descriptors
zookeeper.nodes	znode, ephemerals	nodes
zookeeper.watches	watches	watches
zookeeper.approximate_data_size	size	KiB
zookeeper.server_state	state	state

Alerts

There are no alerts configured by default for this integration.

Setup

Prerequisites

Whitelist mntr command

Add mntr to Zookeeper's 4lw.commands.whitelist.

Configuration

File

The configuration file name for this integration is go.d/zookeeper.conf.

You can edit the configuration file using the edit-config script from the Netdata config directory.

cd /etc/netdata 2>/dev/null || cd /opt/netdata/etc/netdata
sudo ./edit-config go.d/zookeeper.conf

Options

The following options can be defined globally: update_every, autodetection_retry.

Config options

Name	Description	Default	Required
update_every	Data collection frequency.	1	no
autodetection_retry	Recheck interval in seconds. Zero means no recheck will be scheduled.	0	no
address	Server address. The format is IP:PORT.	127.0.0.1:2181	yes
timeout	Connection/read/write/ssl handshake timeout.	1	no
use_tls	Whether to use TLS or not.	no	no
tls_skip_verify	Server certificate chain and hostname validation policy. Controls whether the client performs this check.	no	no
tls_ca	Certification authority that the client uses when verifying the server's certificates.		no
tls_cert	Client TLS certificate.		no
tls_key	Client TLS key.		no

Examples

Basic

Local server.

Config

jobs:
  - name: local
    address: 127.0.0.1:2181

TLS with self-signed certificate

Zookeeper with TLS and self-signed certificate.

Config

jobs:
  - name: local
    address: 127.0.0.1:2181
    use_tls: yes
    tls_skip_verify: yes

Multi-instance

Note: When you define multiple jobs, their names must be unique.

Collecting metrics from local and remote instances.

Config

jobs:
  - name: local
    address: 127.0.0.1:2181

  - name: remote
    address: 192.0.2.1:2181

Troubleshooting

Debug Mode

Important: Debug mode is not supported for data collection jobs created via the UI using the Dyncfg feature.

To troubleshoot issues with the zookeeper collector, run the go.d.plugin with the debug option enabled. The output should give you clues as to why the collector isn't working.

• Navigate to the plugins.d directory, usually at /usr/libexec/netdata/plugins.d/. If that's not the case on your system, open netdata.conf and look for the plugins setting under [directories].

  cd /usr/libexec/netdata/plugins.d/

• Switch to the netdata user.

  sudo -u netdata -s

• Run the go.d.plugin to debug the collector:

  ./go.d.plugin -d -m zookeeper

Getting Logs

If you're encountering problems with the zookeeper collector, follow these steps to retrieve logs and identify potential issues:

• Run the command specific to your system (systemd, non-systemd, or Docker container).
• Examine the output for any warnings or error messages that might indicate issues. These messages should provide clues about the root cause of the problem.

System with systemd

Use the following command to view logs generated since the last Netdata service restart:

journalctl _SYSTEMD_INVOCATION_ID="$(systemctl show --value --property=InvocationID netdata)" --namespace=netdata --grep zookeeper

System without systemd

Locate the collector log file, typically at /var/log/netdata/collector.log, and use grep to filter for collector's name:

grep zookeeper /var/log/netdata/collector.log

Note: This method shows logs from all restarts. Focus on the latest entries for troubleshooting current issues.

Docker Container

If your Netdata runs in a Docker container named "netdata" (replace if different), use this command:

docker logs netdata 2>&1 | grep zookeeper